Jk dana 44s under xj
#1
Newbie
Thread Starter
Join Date: Sep 2012
Location: detroit, mi
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Jk dana 44s under xj
Looking to swap a set of jk dana 44s under my xj, does anyone know if the control arms will
Bolt up and how much fab work goes into doing this I tried to find a few good threats but nothing good so figured I would ask
Bolt up and how much fab work goes into doing this I tried to find a few good threats but nothing good so figured I would ask
#4
Member
Join Date: Mar 2014
Location: Portland, Oregon
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
There are a few threads on pirate. I plan on doing this at some point....
Control arms will work, but may need 'adjusted' (angled slightly) but nothing else. You can either buy a swap truss from tnt customs or build your own. Coil buckets, shock mounts track bar etc. not that difficult. Then different wheels, and might want more offset to account for the wider axles
Control arms will work, but may need 'adjusted' (angled slightly) but nothing else. You can either buy a swap truss from tnt customs or build your own. Coil buckets, shock mounts track bar etc. not that difficult. Then different wheels, and might want more offset to account for the wider axles
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
06-17-2023 03:57 PM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)