Jeep vibrating violently at and above 50mph
#47
Member
Join Date: Apr 2018
Location: Northern Canada
Posts: 201
Likes: 0
Received 1 Like
on
1 Post
Model: Cherokee(XJ)
Engine: 4.0 Renix
As said, the pinion angle is wrong. That is setup for using a double cardan driveshaft (like with a SYE). It will vibrate like that. You need a SYE and a new driveshaft, or some shims to put the pinion back down.
TMR Customs sells steel shims... I think Ruffstuff does too. Do not use aluminum shims if you go with shims, they are extremely dangerous.
TMR Customs sells steel shims... I think Ruffstuff does too. Do not use aluminum shims if you go with shims, they are extremely dangerous.
#49
As said, the pinion angle is wrong. That is setup for using a double cardan driveshaft (like with a SYE). It will vibrate like that. You need a SYE and a new driveshaft, or some shims to put the pinion back down.
TMR Customs sells steel shims... I think Ruffstuff does too. Do not use aluminum shims if you go with shims, they are extremely dangerous.
TMR Customs sells steel shims... I think Ruffstuff does too. Do not use aluminum shims if you go with shims, they are extremely dangerous.
Thread
Thread Starter
Forum
Replies
Last Post
Nkyshaolin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-22-2016 04:21 PM
matsonian
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
20
11-19-2015 12:07 AM
Fred/N0AZZ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
05-24-2014 05:30 AM
Nicnic100
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
04-29-2010 03:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)