anthony008

I have just driven my Jeep first time yesterday and it feels like i am getting minor vibes when I really give it some gas. I have a 3 inch lift stock tires and 2 degree axle shims. If I accel moderately i feel nothing but on high acceleration it just does not feel/sound right, I cant get a accurate reading because my headers make noise so and it king of drowns out the other noise I am hearing. Any feed back will help, also is a vibes like something that you will really feel of can it be almost not noticeable, and if i am getting minor vibes will it cause damage to anything beside U-joints?

eastonarcher1993

Could be driveline. Do you have a t case drop or a SYE for that lift on there?

anthony008

no i have no t-case drop i was thinking ablout it but i figured with the shims i would not need ma full 1in drop

eastonarcher1993

Def do that drop and see what happens if you still have vibes get an sye

ZINGGG

Also check out your motor mounts and transmission mount, if they're shot you'll get some nice vibes

anthony008

I am going to drop the cross member today and try putting some washers in there for a sort of "home brew" drop and go maybe a half an inch. Because the vibes are so minor i feel a 1inch is overkill and a waste of $30. I think if i went with 4degree shims i would have had nothing vibing but then that bring the bad pinion angle, and i dont want to replace that again. When I do this is it just the cross member that gets dropped or do i need to play with trans mounts too?