I need a measurement
#1
Junior Member
Thread Starter
Join Date: Aug 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I need a measurement
I am trying to wrap my head around something.
I just got my adjustable track bar in the mail today (rustys).
I bought it from an individual. The bar didn't come with the frame mount.
I have the ability and resources to make my own bracket, but I need someone to measure something.
To anyone with an aftermarket frame mount for an adjustable track bar can you tell me how far the bracket drops the eye of the joint from the bottom of the frame. I found on someones website that sales these that there's dropped the bar 3.5" from the bottom of the frame.
I am adding 2 more inches onto my 3.5" lift I have now, so in my cad drawing I only dropped the eye 2".
If someone would please measure their bracket I would much appreciate it!
I just got my adjustable track bar in the mail today (rustys).
I bought it from an individual. The bar didn't come with the frame mount.
I have the ability and resources to make my own bracket, but I need someone to measure something.
To anyone with an aftermarket frame mount for an adjustable track bar can you tell me how far the bracket drops the eye of the joint from the bottom of the frame. I found on someones website that sales these that there's dropped the bar 3.5" from the bottom of the frame.
I am adding 2 more inches onto my 3.5" lift I have now, so in my cad drawing I only dropped the eye 2".
If someone would please measure their bracket I would much appreciate it!
#2
Cherokee Forum Vendor
Join Date: Mar 2011
Location: Lynden, WA
Posts: 1,448
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
There is not a set number to properly set it up. Most lift companies guess what track bar angle will compliment the most of the jeeps and steering set ups out there.
Get your rig put together and on it's on weight with the steering bolted up and tires strait forward. Now picture a line from the center of the tie rod joint (ball/pivot point) on the knuckle to the center of the tie rod joint on the pitman arm. When you mount your track bar, the Line from its bolt hole on the axle, to the center of the pivot point on the frame needs to be parallel as close as possible to the steering drag link pivot lines. Build frame mount accordingly.
Get your rig put together and on it's on weight with the steering bolted up and tires strait forward. Now picture a line from the center of the tie rod joint (ball/pivot point) on the knuckle to the center of the tie rod joint on the pitman arm. When you mount your track bar, the Line from its bolt hole on the axle, to the center of the pivot point on the frame needs to be parallel as close as possible to the steering drag link pivot lines. Build frame mount accordingly.
The following users liked this post:
Thetastycat (08-19-2022)
#6
Member
Join Date: Apr 2011
Location: North Carolina
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Sorry man. I was actually walking outside with a measuring tape (at 0800) and remembered that my jeep isn't even here right now. Lead Foot did give good advice but I'm sure just having a ball park measurement sounds easier. I've gotten a lot of good advice from this site so keep the faith.
#7
Senior Member
Join Date: Aug 2011
Location: Santa Rosa, CA
Posts: 710
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Almost made me not want to help u to be honest.
4.5in rough country lift (sitting at 5.5 with coil spacers and shackle relocators )
Track bar drop mount that came with rc lift has the eye for track bar sittong 6inches below the frame.
Oh and this question could have been answered by calling any company that provides drop mounts and asking them what the drop is. Imo
Last edited by 96rokee; 09-11-2012 at 09:52 AM.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Aug 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Just a tip. Whining on ur thread isnt gonna help..
Almost made me not want to help u to be honest.
4.5in rough country lift (sitting at 5.5 with coil spacers and shackle relocators )
Track bar drop mount that came with rc lift has the eye for track bar sittong 6inches below the frame.
Oh and this question could have been answered by calling any company that provides drop mounts and asking them what the drop is. Imo
Almost made me not want to help u to be honest.
4.5in rough country lift (sitting at 5.5 with coil spacers and shackle relocators )
Track bar drop mount that came with rc lift has the eye for track bar sittong 6inches below the frame.
Oh and this question could have been answered by calling any company that provides drop mounts and asking them what the drop is. Imo
I do thank you for the measurement!
I called other companies and no one wanted to give me the dimension..
Thread
Thread Starter
Forum
Replies
Last Post
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
09-14-2015 10:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)