Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

I need help with my doors haha

Old 07-17-2018, 06:59 AM
  #1  
Newbie
Thread Starter
 
keith1097's Avatar
 
Join Date: Jul 2018
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee (XJ)
Default I need help with my doors haha

So recently my doors on my 99 cherokee sport havent been giving me a good time. The drivers door will only shut if i lock it but no matter what it wont open from the outside. and on both of the rear doors the button outside on the door handle are stuck in. I tried to open them but they are both stuck now and will not open from the inside. Another i noticed with the driver door is that when i open it the door drops about 3/4 of an inch. I checked the welds on the hinge and they didnt break. Do i need to replace the pin???
Old 07-18-2018, 08:00 AM
  #2  
CF Veteran
 
XJlimitedx99's Avatar
 
Join Date: Jul 2012
Location: Andover, VT
Posts: 2,969
Received 224 Likes on 174 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0 L
Default

Sounds like your latch mechanisms are all frozen up. You'll need to pull the panels off to access the mechs and hit them with lube while moving them back and forth by hand. Do a search to see what the best type of lube is. Typically you shouldn't use oil based stuff because it attracts dirt.

Couldn't tell you why your door falls but it shouldn't be difficult to see what has play in it by moving the door up and down.
Old 07-18-2018, 07:50 PM
  #3  
Senior Member
 
larryftmfw's Avatar
 
Join Date: Dec 2011
Posts: 940
Likes: 0
Received 2 Likes on 2 Posts
Default


Get some of this
Old 07-20-2018, 10:21 PM
  #4  
Senior Member
 
dzywicki's Avatar
 
Join Date: Jul 2012
Posts: 676
Likes: 0
Received 69 Likes on 55 Posts
Model: Cherokee
Default

You need to take your door panels off to see what is going wrong. It's a pretty simple mechanism with rods connecting the door button to the latch. There are plastic connector that hold the rods into the latch mechanisms. If that piece breaks, the entire mechanism will stop working. Taking the front door panels off is pretty simple. Three large screws in the arm rest. 1 screw behind the door handle. then wedge something behind the door panel and star pulling it out with your fingers. Once all the plastic connectors are loose around the edge you can lift up on the door panel to get it out of the window channel. Then you can look behind it to see the connecting rods for the locks. You can also pull out the little black circle piece in the door jamb. If you wedge that out, you'll be able to see the rod mechanism that goes from the outside door handle to the latch mechanism.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JSilva627
Modified XJ Cherokee Tech
12
11-26-2012 03:57 PM
jeepguy93
For sale
59
04-21-2011 11:33 PM
Kyzer
Introductions
6
08-14-2010 06:23 PM
wheeler
Cherokee Chat
27
11-04-2009 08:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: I need help with my doors haha



All times are GMT -5. The time now is 10:40 AM.