I need help asap !!!!! Please !!
#1
I need help asap !!!!! Please !!
I'm half way threw my lift and I went to put on the transfer case lowering kit and I snaped a bolt on each side what should I do I have. One bolt on each side holding up my transfer case should I tap it or ????
#2
CF Veteran
Join Date: Jun 2009
Location: Columbus, Ohio
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
I had the same problem, ended up pulling back the carpet in the front seet, pulling the drain plug and ovaling out that hole to reach the tops of those bolts. you'll see there's no hex head, it's a welded on bracket thing. Had to knock em loose from the bottom with an air hammer and chisel, and drop new bolts through them.
#3
CF Veteran
there is a threaded stud and a bolt on each side.
for the stud, use the double nut procedure to remove.
and no, you shouldn't drive around with only one bolt on each side.
you may be able to weld on a nut to the broken stud and simply remove.
for the stud, use the double nut procedure to remove.
and no, you shouldn't drive around with only one bolt on each side.
you may be able to weld on a nut to the broken stud and simply remove.
#5
CF Veteran
Join Date: Jun 2009
Location: Columbus, Ohio
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
Thread
Thread Starter
Forum
Replies
Last Post
Crimmy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-01-2015 06:43 PM
Opethet
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-24-2015 08:14 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)