HP D30 front axle?
#1
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: City of Trees, CA
Posts: 7,387
Likes: 0
Received 10 Likes
on
9 Posts
Year: 93 2 door
Model: Cherokee
Engine: 4.0
HP D30 front axle?
quick one
did a little digging and I'm pretty sure
are all 91-95 model xj's stock with high pinion dana 30's?
if not, how can you tell without opening up the housing
I want to buy an xj with the hp already in so I dont have to swap it down the road.
thanks
did a little digging and I'm pretty sure
are all 91-95 model xj's stock with high pinion dana 30's?
if not, how can you tell without opening up the housing
I want to buy an xj with the hp already in so I dont have to swap it down the road.
thanks
#5
CF Veteran
Join Date: Jan 2010
Location: Virginia Beach by way of Michigan
Posts: 5,482
Likes: 0
Received 24 Likes
on
24 Posts
91-99 came stock with the HP D30. 00-01's had the LP. Easiest way to tell the difference is to simply look at where the pinion is at in relation to the differential. A high pinion D30 will have the pinion sitting just above center on the rear side of the differential. A low pinion will have it sitting very close to the bottom.
Low pinion on the left, high pinion on the right:
Low pinion on the left, high pinion on the right:
#7
CF Veteran
be aware of the vac disco and small u-joints.
96 - 99 are all large joint, non disco and high pinion.
96 - 99 are all large joint, non disco and high pinion.
Trending Topics
#10
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: City of Trees, CA
Posts: 7,387
Likes: 0
Received 10 Likes
on
9 Posts
Year: 93 2 door
Model: Cherokee
Engine: 4.0
thanks for clearing it up with the pictures
and @caged, I'm only looking at 91-95 anyway. so I should be good?
or is there anything I should look out for with those models
and @caged, I'm only looking at 91-95 anyway. so I should be good?
or is there anything I should look out for with those models
#11
CF Veteran
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 4,968
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
#12
CF Veteran
true, and the housing on the vac disco is beefier due to the cast upper control arm mount.
but yeah, 91 - 95 has the smaller u-joints on the 231 equipped models, as far as i know. but the abs equipped with the 242 (limited) models have the larger joints and always non disco...
beware of the 89 and down, as they use a bolt on brake caliper mount, and your caliper won't bolt up unless you swap the knuckles.
but yeah, 91 - 95 has the smaller u-joints on the 231 equipped models, as far as i know. but the abs equipped with the 242 (limited) models have the larger joints and always non disco...
beware of the 89 and down, as they use a bolt on brake caliper mount, and your caliper won't bolt up unless you swap the knuckles.
Thread
Thread Starter
Forum
Replies
Last Post
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)