HnT and tire question
#1
Member
Thread Starter
Join Date: Sep 2011
Location: oregon
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
HnT and tire question
I have 15x8 rims with 4.75 backspacing, im doing a 6.5 RC long arm lift with 33/12.5/15 are those gona rub the arms? also I have the 242 so were shoud I buy the Hack and tap?? thanks
Last edited by 93 2dr cherokee; 01-24-2013 at 10:56 PM.
#2
CF Veteran
Join Date: May 2011
Location: va
Posts: 2,516
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1996
Model: Cherokee
Engine: i-6 4.0
Well if I may offer some criticism 6.5 is high for 33"s but aside from that I believe you will be okay with the 4.75 backspacing rims but at the same time that is going to be pretty close... let me do some research I'll be right back ...
#3
CF Veteran
Join Date: May 2011
Location: va
Posts: 2,516
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1996
Model: Cherokee
Engine: i-6 4.0
it appears you can run a 35 inch tire on those rims but with 35's they will rub the sway bar just a hair with at full lock (fully steered in one direction) so your 33"s won't rub much at all even at full lock
#5
CF Veteran
Join Date: Feb 2011
Location: Dubuque IA,Libertyville IL
Posts: 2,450
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
get a hack n tap from dirtbound offroad. its the same as the iron rock offroad one but you can get a discount at dirtbound if you use CHEROKEEFORUM in the coupon box.
#6
Member
Thread Starter
Join Date: Sep 2011
Location: oregon
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
ya this is my friends cherokee im helpin him build and he wanted 35s but he doesent want to reagear and he has a turdy5 in the rear so got him to do 33s. would the same rim 7 inches wide be ok or is that to narrow?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cherokee_Mike
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-05-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)