help camber??
#1
Junior Member
Thread Starter
Join Date: Jan 2011
Location: Wingdale
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0l
help camber??
ok i very good with jeeps but i can not figure this one out
2000 cherokee 5" lift by rcx my front wheels are off camber very noticably
what can fix/or be the problem?
wheel bearings new....no play in ball joints that i can feel by moving wheel with hand
have tried multiple tire n rim combos still same...top tucked in....bottom pushed out??
could it be bent axle ends? something else bent? any help or ideas would be great
figured id throw it out here before i put another axle in
2000 cherokee 5" lift by rcx my front wheels are off camber very noticably
what can fix/or be the problem?
wheel bearings new....no play in ball joints that i can feel by moving wheel with hand
have tried multiple tire n rim combos still same...top tucked in....bottom pushed out??
could it be bent axle ends? something else bent? any help or ideas would be great
figured id throw it out here before i put another axle in
#2
The only thing I know of would be loose ball-joints. You may try using a pry-bar to check them with the wheels off the ground. I have seen ball-joints made to give you canned adjustment but you shouldn't have any problems unless something is bent/worn.
Thread
Thread Starter
Forum
Replies
Last Post
9krpmrx8
Other Vehicles. Other Jeep models & cars and trucks of other makes
4
09-25-2015 08:41 AM
MajorCollateralDamage
Modified XJ Cherokee Tech
5
09-01-2015 11:00 AM
95Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-28-2010 12:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)