Hack n tap sye install help
#1
Newbie
Thread Starter
Join Date: Jan 2011
Location: norcal
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0l
Hack n tap sye install help
im lifting my 90 xj 4" and also bought an iron rock hack n tap sye and driveshaft, if anyone has installed one and has pics on how to do it that would be great. thanks
#2
CF Veteran
Join Date: Jan 2010
Location: Forest, VA
Posts: 3,379
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
#3
Senior Member
Join Date: Aug 2010
Location: Gilman, IL
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Not to be blunt, but on a new np231 with flange on just measure, cut, drill, and tap, on the older ones, you need to buy their flange kit to keep fluid in, then same steps.
#6
CF Veteran
Join Date: Mar 2010
Location: Jacksonville, FL
Posts: 6,685
Likes: 0
Received 5 Likes
on
5 Posts
Year: 92
Model: Cherokee
Engine: 4.0
cutting is easy. mark the spot, start vehicle and put in reverse (with the vehicle safely secured and driveshaft off, and start cutting at the mark with a cutoff wheel. it will make a nice even cut
Thread
Thread Starter
Forum
Replies
Last Post
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2016 08:10 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)