front ds vibrations
#1
Senior Member
Thread Starter
Join Date: May 2011
Posts: 749
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0
front ds vibrations
alright im running roughly 5 inchs of lift, with a rustys 1 drop crossmember. i had been running this setup for a while with no vibes on either driveshaft. i had to pull the engine and trans a couple months ago and never bothered to hook the front shaft back up. i recently got some adjustable bds uppers, and adustable rubicon lowers. i set the to rough country's suggested length for running drop brackets. i put my driveshaft back in and it vibrates badly. i take it to an alignment shop ive been going to yrs to get my caaster checked and its 0 degrees on both sides.
which way do i need to adjust the arms, and is their away for me to get a good measurement on my caster with out going to the alignment shop?
if i remember correctly my caster should be 7.0 degrees positive.
which way do i need to adjust the arms, and is their away for me to get a good measurement on my caster with out going to the alignment shop?
if i remember correctly my caster should be 7.0 degrees positive.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-03-2015 06:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)