MAJHMR

What is the best approach to connect the parking/emergency brake cables for a Ford 8.8 rear axle parking/emergency brakes to a '00 XJ 4-door. I bought the cables for the Ford 8.8 axle. They are too long. I have the original equalizer, front cable and bracket that mounts to driver side frame. Should I return the Ford cables and use Cherokee XJ cables?

884x4

I heared zj cable work if you clamp them around the 8.8s e brake bracket. I'm not running an e brake with my 8.8 yet because I've been too lazy lol

Big David

I think you meant XJ, they will work. The ZJ & Explorer cables are pretty much identical except for the length.

884x4

Dang that sucks cause I threw my xj cables away cause I thought only zj cable worked for some reason haha

Desertfox1023

The XJ Cables work

1) Clip the End on the Axle Side
2) Wrap it around the E-Brake Hook
3) Clamp the line with 2 Line Clamps


Been running that way for over 5+ years no issues

MAJHMR

I will try this set up; sounds like I can make this work with limited dain bramage.

Desertfox1023

I used to have a thread where I built mine but all the links are now broken where they changed servers. I can get new ones for you if need it. But its pretty straight forward.

Big David

I ran mine the same way for a while. I got fancy & wanted to run a ZJ & Explorer cable.


I should have left it alone.


You can get the cable clamps for less than 50 cents each.