folded rear fenders. but need opinion.
#1
CF Veteran
Thread Starter
Join Date: Dec 2010
Location: S.Jersey
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
folded rear fenders. but need opinion.
well today was kinda bitter sweet. while doin the rear passneger my one and only cancer spot popped open. so im gonna get a panel and weld it in.
any way...this is at stock height. i have a 3" lift for it and a buget boost of 1"fr and 1 1/2 for the rear. i know i need tires just dont have the money right now and it will prolly be another year before i need them.
so with these 235's can i just put my b/b on with the 3" shocks? my leafs dont sag at all. im kinda thinkin it would look really nice with what has been done to it. i think it looks lifted and i dont want to look dumb for a
year..
i also have an adj trac-bar...should that go in too...just because its new.
so the lift will be 1"fr and 1 1/2 r.
any way...this is at stock height. i have a 3" lift for it and a buget boost of 1"fr and 1 1/2 for the rear. i know i need tires just dont have the money right now and it will prolly be another year before i need them.
so with these 235's can i just put my b/b on with the 3" shocks? my leafs dont sag at all. im kinda thinkin it would look really nice with what has been done to it. i think it looks lifted and i dont want to look dumb for a
year..
i also have an adj trac-bar...should that go in too...just because its new.
so the lift will be 1"fr and 1 1/2 r.
Last edited by OEJ; 04-04-2012 at 02:58 PM.
#3
CF Veteran
Join Date: Dec 2010
Location: Frankfort IL
Posts: 1,385
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
I like how it looks now. If you are not itching too bad to install the whole lift, I would at most put only the Budget 1in 1.5 for now until you get bigger tires. You should be ok with the 3in shocks as long as you dont flex enough to bottom them out (if you do you could bumpstop with hockey pucks). If your shocks are good now then you could definately run those with the BB.
#4
CF Veteran
Join Date: Dec 2010
Location: Frankfort IL
Posts: 1,385
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
You could cut and fold the lower quarter panel. It would look awesome with a low stance like that since you have the end caps removed and you would get rid of all the cancer.
#5
CF Veteran
Thread Starter
Join Date: Dec 2010
Location: S.Jersey
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
actually my shocks are still good. do u think the new shocks might give a slight lift since the valving is stiffer????
#7
CF Veteran
Thread Starter
Join Date: Dec 2010
Location: S.Jersey
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
funny u say that because thats exactly what i plan on doing. folding the 1/4's... but i need to fix the whole first. i really want to do it right so i wont have to worry about it again.
Trending Topics
#13
CF Veteran
Thread Starter
Join Date: Dec 2010
Location: S.Jersey
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
thats true. it is in the lower corner towards the tire. maybe ill roll them when im off again. thanks alot for the help. i think i am goin to use the new shocks and boots. then put the b/b on and see how it looks. thank god for ur monkey reflexes.