Fixing Floor holes
08-18-2012, 11:49 AM
#1
Newbie
Thread Starter
Join Date: Aug 2012
Location: St Charles
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 I6
Fixing Floor holes
Ok I don't want to go through the process of welding in new floor pans mainly cause I don't know how to weld, Can I just cut out the parts that are rusted and replace with fiber glass then paint the undercarrage with bed liner? the rust spot is only 3 in wide and like 8 in long
08-18-2012, 11:57 AM
#2
CF Veteran
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes
on
16 Posts
Year: My Jeep is a GMC
You need to make sure you have clean metal all the way around the hole. You could use fiberglas resin & mat as a glue to hold sheet metal down on small holes. You can also use 3M Structural Adhesive if you don't want to weld. Rough everything up with 60 grit first.
Last edited by Turbo X_J; 08-18-2012 at 12:00 PM.
08-18-2012, 01:18 PM
#3
Junior Member
That's not how I'd do it but I'm sure it would work. Just make sure you get rid of ALL the rust first or you'll be doing it again.
Thread
Thread Starter
Forum
Replies
Last Post
93civEJ1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-02-2019 04:08 AM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
FS[GreatLakes]: Upgraded 4 Hole 87-98 Injectors
JeepStephie99
Engines/Tranny/T-Case
107
07-12-2016 01:58 PM
Cherokee_Mike
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-05-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)