FelPro oil pan gaskets didn't fit properly
#1
Junior Member
Thread Starter
Join Date: May 2014
Location: Milford DE
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
FelPro oil pan gaskets didn't fit properly
On my 1996 Cherokee I replaced the rear main seal. A real problem I had was the FelPro oil pan gaskets I bought didn't fit properly in the rear. when I tacked the gasket to the engine block there was too much clearance at the rear bearing cap which is a critical area. I tried two different ones. I wound up buying a MoPar gasket that fit perfectly.
#3
Junior Member
Thread Starter
Join Date: May 2014
Location: Milford DE
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
It was a blue one. I know. They have a good rep that's why I bought them. I have always bought them. Maybe it's just an East Coast problem. The thin, free standing tail piece in the rear was too long on both gaskets. Beats me Brother, just something to watch out for.
Thread
Thread Starter
Forum
Replies
Last Post
MayerMR
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
54
05-21-2016 09:25 PM
poomero
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
02-27-2016 05:20 PM
JustEmptyEveryPocket1998
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
02-22-2016 12:27 AM
Scottsb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
02-16-2016 12:35 PM
MDionne87
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
02-15-2016 08:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)