Extended brake lines what length do i need?
#1
Member
Thread Starter
Join Date: Feb 2012
Location: SoCal
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 high output
Extended brake lines what length do i need?
I will be having my local hose shop making me some extended brake lines and i need to know the length that they should be at. my jeep has a 4.5 lift with short arms.
#2
Depends on how much down travel you have. Figure out how far the shocks (or limit straps if you're running some) will let you go. then make sure you turn the wheel so the calipers are as far from the truck as possible and note the length. People often forget that eats up some brake line length too. everyone's setup is different.
#3
Member
Thread Starter
Join Date: Feb 2012
Location: SoCal
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 high output
Depends on how much down travel you have. Figure out how far the shocks (or limit straps if you're running some) will let you go. then make sure you turn the wheel so the calipers are as far from the truck as possible and note the length. People often forget that eats up some brake line length too. everyone's setup is different.
#4
CF Veteran
Join Date: Nov 2011
Location: SLC, Utah
Posts: 3,603
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Depends on how much down travel you have. Figure out how far the shocks (or limit straps if you're running some) will let you go. then make sure you turn the wheel so the calipers are as far from the truck as possible and note the length. People often forget that eats up some brake line length too. everyone's setup is different.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-05-2015 07:56 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)