CherokeeJon

Alright, so I'm getting my new project today. It's an 86 comanche that had the 2.8 in it but we are installing a full driveline from a 92 cherokee. 4.0, aw4, and np242. We have the wiring harness from the 92 and the one that's in the 86. There's going to be a bunch of us doing the install and we all have a basic idea on what needs to be done, but I'm asking for tips that would come in hand during the install. Especially anything electrical, I definitely do not want to mess up on the wiring. Thanks ahead of time for any tips I may receive.

CherokeeJon

So I received the jeep today and immediately got to work. Instead of using the partial harness I got with the engine, I'm going to use the complete and untouched one out of my 93 cherokee. I'm going to basically do a "AC delete" and clean up other unnecessary wiring to be left with only the radio, gauges, and taillights.

I know I can use the typical diagrams online, but does anybody have a link to a diagram that might be more easily applied or one they found to be most helpful? I have a busy week with school and track but I'm going to be doing anything I can whenever I have the free time