lukeandjakejeep

Do I need a drop pitman arm with this bracket? I've heard yes and no's, just need a straight answer.
http://www.seriousoffroadproducts.co...ducts_id=90172

Lead Foot

You hear yes and no because we know nothing of your setup. The answer will vary depending on many different variables.

lukeandjakejeep

I have a 4.5 inch lift with RC adjustable trac bar, and control arms. everything else in the steering is stock. what else do you need to know?

lukeandjakejeep

I still need help on this.

freegdr

will that bracket drop the mounting point of track bar from factory location is where your answer lies, if its lower use the longer pitman if same as factory use stock pitman.

Metmknice

RE bracket is NOT a drop bracket. Looks like it would be, but since it mounts the TB in double sheer it has the illusion of a drop. If your TB/DL angles are the same or REALLY close, then I would say no on a drop pitman arm.

ktmracer419

you will be fine without one. a billiondy people run that bracket/trackbar system without a drop pitman without issue

jmccallie

I have the 4.5 in long arm lift and did purchase the drop pitman arm. Is there a con to installing it?

ktmracer419

it could cause bumpsteer

BNJeepsta

X2 I'm at 4.5" and my track bar and drag link are really close to parallel

MI_Offroad

I was at 4.5" and didn't need anything dropped. Now ACOS spacers adjusted to 6" and crossver steering installed, I still haven't dropped the pitman arm or added a stabilizer and it steers pretty good. My play is from a worn box, otherwise it would handle great.

92XJGuy

I'm going to be doing a 6.5'' lift, I just bought the IRO adjustable double shear track bar, I was wondering if it'd be wise to get a drop pitman arm. I have stock steering, but I'll be going to the WJ steering.