draglink shot, upgrades?
#1
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: Salem Nh
Posts: 1,756
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
draglink shot, upgrades?
so the drag link on my rig is shot, so i was wondering what i should do to upgrade it. some things i was thinking of are, just replace it with a oem one, and upgrade the tie rode to a ZJ one, or upgrade both the drag and tie rode with something after market. anyone have any suggestions? im not looking for 1 ton steer or OTK, and the only thing i have really seen that doesnt require reaming and rustys steering conversion http://rustysoffroad.com/mm5/merchan...egory_Code=ste but i really dont have that much to spend. so any suggestions?
#3
Senior Member
Join Date: Jan 2011
Location: Los Fresnos, Texas
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2k
Model: Cherokee
Engine: 4.0
Reaming is not required. I did ream when I put on my 1-ton OTK kit from JCR but that was because I didn't know about the inserts you can use. I believe you drill a 7/8" hole and use said inserts either OTK or UTK. There is a vendor on here that sells it all for a descent price, I just don't remember who it was.
#4
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: Salem Nh
Posts: 1,756
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
Originally Posted by Modestmike
Reaming is not required. I did ream when I put on my 1-ton OTK kit from JCR but that was because I didn't know about the inserts you can use. I believe you drill a 7/8" hole and use said inserts either OTK or UTK. There is a vendor on here that sells it all for a descent price, I just don't remember who it was.
#5
Senior Member
Join Date: Jan 2011
Location: Los Fresnos, Texas
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2k
Model: Cherokee
Engine: 4.0
There are good and bad reviews for every kit out there. What worked for one person was total crap for another. I found out that this is something you have to just decide on with the info at hand and jump on it without second guessing yourself. I'm satisfied with my OTK setup.
#7
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: Salem Nh
Posts: 1,756
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
I really would like to go with the rustys kit, but I dont really have that much right now, I think I might go with a stock draglink, and zj tie rod, iv read good things about the zj tierod swap
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
MightyMouse8
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
10-08-2015 08:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)