Dana 30 axle sleeves
08-19-2012, 04:17 PM
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: Johnson County, Kansas
Posts: 701
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Dana 30 axle sleeves
Not sure if this is the right place for this but here goes. How do you change the inner seals with the sleeves in place? Thinking about buying some 2 inch Dom and making my own.
08-19-2012, 04:23 PM
#3
CF Veteran
It's a second tube pressed inside the existing axle tube, to add strength.
Last edited by Dan91; 08-19-2012 at 04:27 PM.
08-19-2012, 04:29 PM
#4
Senior Member
Thread Starter
Join Date: May 2010
Location: Johnson County, Kansas
Posts: 701
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Dan91, Do you think a truss would be more effective?Never thought about the sleeves not adding strenght where the tubes go into the the housing.
08-19-2012, 04:36 PM
#5
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
i k now what a sleve is wondering what op was calling a sleeve to replace seals you knock them out thru outer tubes on oppisite sides install same way
08-19-2012, 04:42 PM
#6
CF Veteran
Well, it seems to me that the weak point would be the joint of the tubes and housing. Most people just do a small truss for their D30s for strength, not many people bother with sleeves from what I've seen.
Thread
Thread Starter
Forum
Replies
Last Post
aa7kn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-23-2015 09:08 AM
codykrr
Modified XJ Cherokee Tech
9
09-18-2015 01:27 PM
Ibanezz
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-10-2015 07:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)