bigjohnson619

Was curious if anyone made a truss with the control arm mount and spring buckets to swap a d60 into a Cherokee?

brookhart63

Ill bet some of the hardcore guys here have. Check out the Cherokee section on pirate4x4
I have seen several over there

bigjohnson619

Thanks.... I know I saw one u could buy for the d44 from older Ford's.

Customizer1000

no truss that im aware of, only parts.

Back_In_Black

Tnt makes the for the 44, but I haven't seen a complete truss before, only fab parts.

bigjohnson619

Thanks... I stumbled across a d60 and 10.25 out of a 2002 f250 for 300 dollars... gonna go with tons sooner then I thought

PingPong

TNT will also make a truss for a d60 if you call and ask. Look into Artec Industries too. There is always making your own.. not very hard, if you think ooutside the box.

Customizer1000

$300? That's awesome!

Back_In_Black

Nice! That's what I paid for my 44 and 9"!

alloutperform

if you are capable of the swap i'll bet you can figure out the mounting points... also you probably don't need a front truss.... i have narrowed those front ends the tubes are 7/16" thick or better you won't bend it with a cherokee unless you really sky it.. or just get the 44 kit you saw and edit it to fit...

bigjohnson619

I was just going for ease... I have the tools and ability to do it just always looking for the easiest way

alloutperform

but where is the fun in that???

bigjohnson619

The fun comes four linking the rear

alloutperform

true... three link the front they work better... i'm doing a buggy build right now and i discovered that a la front doesn't work as well as 3 link.. i got the jeep thing build in the build page if you want any ideas.. i used a single ballistic joint in the middle of the rear as a uniball on a wish bone super stable and still flexes more than my clearances let me

bigjohnson619

Ok... I got the ironrock la up front right now.. not sure what I want for the rear yet...