Im gonna swap my d35 to a 8.25 very soon, I just have a question about the abs, if I go from abs to no abs am I gonna have any problems or anything? I was trying to price some axles and a guy at a local junkyard tryd telling me im gonna have problems and told me to stick with the d35. I just want to double check that I wont run into any problems

I do not know about actual issues with the brake system, but there could be issues with a vehicle inspection if your state does them. Each state varies on the level of inspection and in some of the northeast states it can be very strict. If your vehicle was originally equipped with it ABS then it must remain in proer working order to pass inspection. Check with local authorities to know what is legal.

Ok well beside from that, I shouldnt have any issues with swapping it over?

I could be wrong here, but the Chry 8.25 never came with ABS. If you pull your drums off you will see the wheel speed sensor on the D35. You won't have this on the Chy 8.25. Also I assume you know that the U-bolts are larger (3")

If u read my post u will read that I. am go from a d35 and swapping in a 8.25, there for loosing my abs, thats y I askd if I will run into any problems

I don't have a d35, but this is what I think is going to happen. First, when you install the c8.25 your abs light will come on, because your rear axle doesn't have the sensor. I think you can remove the fuse for the abs light and it will go out. Like I stated this is what I think will happen. Research a little and you will come up with a better, more definitive answer to your question.