crossmember moved? clunk grind after 3" lift
#1
Seasoned Member
Thread Starter
Join Date: Aug 2011
Location: Tunkhannock PA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4L
crossmember moved? clunk grind after 3" lift
first thing. i have some vibes after my 3" lift install so i wanted to do a TC drop. i broke a bolt off and had to cut open passenger floor to get to it. (there where no drain plugs to pull as someone told me there should be.) there was some kind of sheet metal i-beam with cementish stuff setup in there where someone had moved the crossmember so the front bolt is right next to where the rear bolt was and the rear bolt is back more. odd thing is the case looks like its supported in the right spot, there are a few electrical connectors that are just hanging there too. did my xj have a different TC before, would that need the crossmember to be slid back 4"?
also have a clunk and a quick grind when i let off the gas. this started right after the lift install, never noticed any noises before that. any ideas? driveshaft,u-joint,etc?
also have a clunk and a quick grind when i let off the gas. this started right after the lift install, never noticed any noises before that. any ideas? driveshaft,u-joint,etc?
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
aroundincircles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 11:12 AM
MyJeepIsATyrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-04-2015 10:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)