A couple mod questions
#1
Member
Thread Starter
Join Date: Aug 2011
Location: Quincy
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
A couple mod questions
I have a couple things I’m curious about but each on their own is not enough to warrnt a whole thread. So I figured I would put them all together.
1st question. Is there a data buss I can tap in a 96xj? I have installed an overhead console from a 97? Zj and it works well enough but I would like if I could get data from the ecu to show trip mileage, mpg, miles to empty etc. I have read the overhead console write up and it has lead me to believe there is a buss somewhere I can tap but I don’t know where that is.
2nd question. What degree shim do I need for a 4.5 inch lift and no crosmember drop? I am removing the drop and I need a new shim I believe.
Lastly. Does anybody know if it’s legal in mass to delete the tail pipe and dump the exhaust right out the muffler before the rear axle.
Any help on any of these would be awesome thanks!
1st question. Is there a data buss I can tap in a 96xj? I have installed an overhead console from a 97? Zj and it works well enough but I would like if I could get data from the ecu to show trip mileage, mpg, miles to empty etc. I have read the overhead console write up and it has lead me to believe there is a buss somewhere I can tap but I don’t know where that is.
2nd question. What degree shim do I need for a 4.5 inch lift and no crosmember drop? I am removing the drop and I need a new shim I believe.
Lastly. Does anybody know if it’s legal in mass to delete the tail pipe and dump the exhaust right out the muffler before the rear axle.
Any help on any of these would be awesome thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Bastard Child
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
11-04-2014 08:00 PM
Che Guevara
Modified XJ Cherokee Tech
2
08-21-2011 08:47 PM
Bastard Child
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
01-29-2008 05:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)