Coil Spring Rates
06-12-2011, 08:35 PM
#1
Seasoned Member
Thread Starter
Join Date: Jan 2011
Location: Wrightstown, NJ
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986 Comanche
Engine: Chevy 350
Coil Spring Rates
Hoping someone here can give me a few points on this. I'm trying to dial in my suspension perfectly and was looking for a little feedback. If it comes to it, I'm just going to slap in a set of Rusty's 4.5" coils (150lb/in).
What I have right now is a custom 3-link true long arms, Rusty's 8.5" coils (180lb/in), SOA with stock 4wd Comanche leafs with IronMan4x4 shackles. I'm running 33's right now with a measured 8.5" lift. I'm looking at going down to 4.5" lift and will be going to 37's when the one tons go under.
Any input is appreciated.
What I have right now is a custom 3-link true long arms, Rusty's 8.5" coils (180lb/in), SOA with stock 4wd Comanche leafs with IronMan4x4 shackles. I'm running 33's right now with a measured 8.5" lift. I'm looking at going down to 4.5" lift and will be going to 37's when the one tons go under.
Any input is appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
ROCKRIDGE 4WD
Vendor Showcase
1
10-20-2015 03:53 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
atlantis7
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-10-2015 09:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)