Birdcr125

i am considering taking the d35 off the back and flipping it to fit the front then putting a 44 i the rear the problem is i was wondering how hard it is to find lift to fit the new axles. im sure someone has done similair any advice on finding a 6-8 in lift to fit.

Jeepjunky

what?? why the hell would you put a D35 in the front??

freegdr

the dana 30 is stronger than the 35 just put in the 44 lift it and drive it like you stole it JM2CW

Birdcr125

ok with that being said maybe ill leave the front alone but were would i find the lifted leaf springs to fit the rear id rather just buy a complete kit rather than buy half for a cherokee and other half for something else. suggestions

freegdr

you make the rear fit the xj not the other way around...

Birdcr125

makes sense figured id be doing some modifying just wasnt sure how much didnt know if someone sold a lift designed for it or if i was '' building it myself'' so to speak.

Jeepjunky

have you tried google at all? there are plenty of companies the sell lifts for XJs

XSXJ

Buy a lift kit. The leaf springs that come in the kit will fit your xj. You will have to change the leaf perches on the axle to fit your springs.
What size tire are you planning on running once you get that much lift on? You may want to do some research on what axles will handle what tire size if you're thinking any bigger than a 35" tire.

ProudXjOwner

Not to be rude but you need to do alooooooot of serching. I say keep the 30 swap a 29 spline 8.25 and buy a kit.

dogger15

Go with a ford 9 and Dana 44 up front full width. If don't want full with do the 8.8 amd a waggy 44