CEL after header install
#1
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Bloomfield, MI
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
CEL after header install
I installed a set of Rugged Ridge Stainless headers as well as a test pipe on my 92 Cherokee and now the CEL is on and it idles higher than normal when in park. Driveability is fine and nothing else is affected. I just want to clear the CEL code if possible seeing as though it is an OBDI. O2 sensors are also still good.
#2
Member
Join Date: Jul 2011
Location: East Tennessee
Posts: 150
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
Have no idea if this will help but you can always null out the computer by touching the two removed battery connectors together for 10 seconds (TAKE BOTH OFF the BATTERY!!) to reset the computer.
#3
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Bloomfield, MI
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2016 08:10 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)