Gade91

hey guys, i'm lookin at putting in a cb radio in my jeep but dont really know where a good spot would be. so where have you guys put them or seen them? post any pictures if you got them. thanks guys

farmerjohnson

here ya go. there is a factory mount up there. Its supposed to be where the overhead console goes.

K-SKI

wow you read my mind ive been searching the same thing for the past 2 days now cant wait to see

thecanman

I've been thinking about doing the same thing.

NorCalJeep

mines mounted by the shifter on passenger side

cookrw

That's also where mine is. I will take a picture tonight and post it.

jhampton

on the dash in the center, with a magnet mount to the roof (i have no headliner ) i love it it easy to reach and see

prerunner1982

I was lucky enough to not have a center console so I made a mount (and cupholders) to go between the seats. However the plan is to put it above the rearview mirror in a console that goes from one side to the other along the top of the windshield.

K-SKI

got tird of waiting so i did mine today. found a spot out of the way the first pic is where it is and the last two are with my leg in normal driving possion and the last one is with my leg all the way over to the consed pant leg pull back so u can see how close it is

cookrw

Here's where mine is!

Turbo X_J

In a crash if your knee ends up where that CB is, it's gonna leave a mark.

K-SKI

Better me than my wife or kids with it on the passenger side. But I did try to tuck it out of the way

MTLXJ

On the right of your shifter.

Gade91

hey what do you guys think about putting it flush into the dash? like in that bottem half. I havent gotten a good look inside of it yet to see if would work but what do you guys think?

Metmknice

My plan, originally, was to place it where the ashtray/front cubby of the console is. I swapped in a 97+ console a couple years ago, and have the DBO gauge/switchpod in the ashtray area. So I mounted mine driver side of the console near the front with handy-tak/velcro/zipties. I am powering it with a switched cig lighter adapter plug, and for now the mic sits over that. When I get around to hard wiring my ac inverter, I will hardwire the cb as well.