CAD elimination seal
07-29-2017, 04:16 PM
#1
Seasoned Member
Thread Starter
CAD elimination seal
Hopefully a quick question? Doing the CAD elimination on my 1986 xj with a dana 30 front axle.
Does anyone know the part # for the seal that goes in the differential housing? I know its not the same as the drivers side which is a 710068 National.
I will check back later, still under the jeep working, just wanted information before I head to the parts store later.
thanks in advance.
texastaz38
Does anyone know the part # for the seal that goes in the differential housing? I know its not the same as the drivers side which is a 710068 National.
I will check back later, still under the jeep working, just wanted information before I head to the parts store later.
thanks in advance.
texastaz38
07-29-2017, 05:20 PM
#2
Seasoned Member
Thread Starter
Answered my own question I think. For future reference:
O'really #471763 is 2.004 O.D. x 1.125 I.D.
O'really #471765 is 2.004 O.D. x 1.187 I.D.
The one piece shaft out of my 93 measures 1.192 with a dial caliper. no micrometer handy. Going with the #471765.
Hope this helps someone else.
Happy Jeepin"
TexasTaz38
O'really #471763 is 2.004 O.D. x 1.125 I.D.
O'really #471765 is 2.004 O.D. x 1.187 I.D.
The one piece shaft out of my 93 measures 1.192 with a dial caliper. no micrometer handy. Going with the #471765.
Hope this helps someone else.
Happy Jeepin"
TexasTaz38