Bumper Mounting
So I recently acquired a , while the bumper seems nice enough I am a little concerned about how it mounts. The bumper uses the stock 3 holes on the frame to mount its brackets. Is this going to be secure enough to do a actual recovery? I ask because after looking around it seems several more expensive manufactures have you drill additional holes and have reinforcement plates.
Thanks Guys |
Any bumper that comes with recovery points or even a winch with no tie in brackets is a big red flag. You need to tie the bumper into the uniframe more than the weak factory sheet metal bumper bolts. You can either make your own or buy tie in plates from several companies. Don't be that guy with a ripped front frame and bumper because you didn't tie everything in.
|
Originally Posted by unidentifiedbomb
(Post 3543409)
Any bumper that comes with recovery points or even a winch with no tie in brackets is a big red flag. You need to tie the bumper into the uniframe more than the weak factory sheet metal bumper bolts. You can either make your own or buy tie in plates from several companies. Don't be that guy with a ripped front frame and bumper because you didn't tie everything in.
|
All times are GMT -5. The time now is 11:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands