Brake lever from bike for throttle control
#1
Member
Thread Starter
Join Date: Nov 2012
Location: Stanwood WA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
Brake lever from bike for throttle control
Have you done this? I thought I may be neat to have I have it mounted to shifter I could use ideas on how to tie it in. If so I'd like to see it.
#3
CF Veteran
most would use a non indexed thumb shifter from a cheap department store bike and mount that to the stick shifter. (most front shifters are non indexed, friction shifters).
use a rear shifter cable and housing and feed that through the fire wall and onto the throttle lever on the throttle body. you will see how it needs to be installed just by looking at the gas pedal cable and cruise cable. you may need to get a little creative here.
use a rear shifter cable and housing and feed that through the fire wall and onto the throttle lever on the throttle body. you will see how it needs to be installed just by looking at the gas pedal cable and cruise cable. you may need to get a little creative here.
#5
CF Veteran
I had an '87 XJ that I wanted to warm up better on subzero mornings. I rigged up a rear derailleur twist-shifter (I think a SRAM MRx), so I had 7 indexes I could set the idle at. Mounted flush with the top of the manual shift stick, it worked well as a shifter ****. I'll also admit I used it once or twice as a dangerous type of cruise control.
#6
Member
Thread Starter
Join Date: Nov 2012
Location: Stanwood WA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
I got it working I couldn't get cruise to work ever not do I need it so I cut the cruise line up and used some little springs I had laying around to help pull the TB closed. It was sticky
#7
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
You could always go for this.
http://www.seriousoffroadproducts.co.../Hand-Throttle
same link is actually posted on this thread. But heres a guy that done it, scroll about half way down the page.
https://www.cherokeeforum.com/f67/hand-throttle-154454/
http://www.seriousoffroadproducts.co.../Hand-Throttle
same link is actually posted on this thread. But heres a guy that done it, scroll about half way down the page.
https://www.cherokeeforum.com/f67/hand-throttle-154454/
Trending Topics
#9
Member
Thread Starter
Join Date: Nov 2012
Location: Stanwood WA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
#10
CF Veteran
no worries, just thought i would give that option, considering most towns have a bike shop or department store that sells bike/parts.
#11
Member
Join Date: Sep 2012
Location: Deep in the woods in SouthCentral Pennsylvania
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5
I used the shifter from a 10 speed bike for mine. A lot smaller and looks great too.
Here is mine,,, check it out
https://www.cherokeeforum.com/f46/96...-build-150812/
Here is mine,,, check it out
https://www.cherokeeforum.com/f46/96...-build-150812/
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
2000JGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-03-2015 09:53 PM
mtoskippy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-03-2015 09:21 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)