Trac bar
#1
Member
Thread Starter
Join Date: Aug 2012
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Trac bar
Im finishing up my axle swap and I put a trac bar relocation bracket on while i was at it. I'm at 3" with stock trac bar. The axle was a little off center before obviously. So i decided to put the relocation bracket on while I had the trac bar unhooked. But when I put it all together my axle was shifted to the passenger side and the driver's side coil was rubbing on the trac bar body mount. Any ideas as to what the issue is?
#3
Junior Member
Join Date: Sep 2013
Location: Springfield, TN
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Grand Cherokee
Engine: 4.7L
oops just saw that you are still using a stock trac bar. You will most likely need an adjustable trac bar to properly align the axle/vehicle.
Thread
Thread Starter
Forum
Replies
Last Post
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)