Besides spline, do dana 30 , 27 and 30 spline have other differneces ?
03-14-2013, 06:14 AM
#1
Senior Member
Thread Starter
Join Date: Jul 2011
Location: Chuluota
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Besides spline, do dana 30 , 27 and 30 spline have other differneces ?
I bought g2 Chromos and when I went to install last night it would not fit in the side gears. The hole on the end is noticeable smaller (lower one)I know I could just count the teeth but it was 1am last night before I got to it . Just assumed I was sold right part. Any thoughts ?
03-14-2013, 06:55 AM
#3
Junior Member
03-14-2013, 01:04 PM
#5
Senior Member
Thread Starter
Join Date: Jul 2011
Location: Chuluota
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Found a caliper at work... Now I'm stumped . Very well could be I was tired last night , but I shouldn't take that much brain power to pop in a shaft
03-14-2013, 01:14 PM
#6
Senior Member
Thread Starter
Join Date: Jul 2011
Location: Chuluota
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Just called g2 and they said they are just a tight fit, try a mallet. lol
Last edited by FleXJ01; 03-14-2013 at 01:59 PM.
03-14-2013, 01:15 PM
#7
Senior Member
Join Date: Jan 2011
Location: Dalton, MA
Posts: 645
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O. 180K miles
Do you have a stock carrier? I would count the splines on both shafts to make sure it will work before you go pounding away
Trending Topics
03-14-2013, 02:00 PM
#9
Senior Member
Thread Starter
Join Date: Jul 2011
Location: Chuluota
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
stock carrier and 27 spline spartan. I think it is just a way tighter fit then I am used to , so when I get home I will try again with some force. Thanks for the help.
03-14-2013, 03:17 PM
#10
Member
Join Date: Jan 2011
Location: Lakeland, Florida
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0 i6
Try and wiggle it left to right when it starts to seat in the splines. They should be tighter than stock shafts. Hit me up on fb if u have anymore questions man.
03-14-2013, 10:17 PM
#11
Senior Member
Thread Starter
Join Date: Jul 2011
Location: Chuluota
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
She's in like flin now. Thanks guys. Just took a fresh restart. messed with until late last night, walked out today and had it done in 10 minutes
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
06-17-2023 03:57 PM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)