00exjay

Got a black 2 dr and I wand to do the fender flairs and bottom of the doors in bed liner but I want to know how it would look before I do it. Anyone got pictures of what they did?

hoaxci5

I used Rustoleum spray on bedliner, but removed the flairs..

rmoore1031

Here you go. Stock flares and trim bedlined.

andrewmp6

I would go up higher like the belt line on the sides.

austinjoe13

rctrav

00exjay

How would this look with it?

VTJeep

nice xj man.. my personal preference is to pull the flares, trim and be happy, but either way it would look good bedlined. maybe pull flares, bedline, then reinstall flares. if unhappy, spray the flares too..

98_XJ Sport

Stock flares bedlined up to the first fold. Also did the mirrors

00exjay

That's EXACTLY what I was planning to do to mine. Only I'm afraid the difference in gloss between the paint and bed liner would look funny . Like shiny and dull kinda thing

98_XJ Sport

You could always go over the bedliner with black clear or clear coat. (I wish I did) for uv protection and it'll just last longer

imchrislara

Did mine a few weeks ago. Prep took longest

Ole Green

I used a can of rustoleum bed liner spray for bottm of my xj, sanded down first and used a light coat of primer before spraying a light coat.

imchrislara

With sanding, taping and waiting 15minutes between each coat took about 4 hours or so. Plus the 4 I spent taking off the ugly faded trim. I used rustoleum bed liner, and 400 grit sand paper and some paint prep wipes..... no primer needed.