Axle shaft question
01-22-2011, 09:13 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Location: muskogee oklahoma
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: I6
Axle shaft question
I have a 89 xj that I just changed the hub assembky on and for the life of me can't seem to find the right u joint on my axle.. Ever entire assembly minus the hub says spicer.. Do I have to order more spicer u joints? Does spicer come factory or is this replaced? Luckily I had a spare axle shaft laying around.. I hate buying used vehicles
01-22-2011, 09:48 PM
#2
Junior Member
Join Date: Aug 2010
Location: Fredericksburg VA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Courtesy of Jeep Horizons:
Dana 30 high pinion - reverse cut - 27 spline, 1.16" diameter shafts, 7.13" ring gear - used 84-99 (some axles through 91 are vacuum disconnect, 92+ are non-disconnect, 89-95 with ABS have 5-297x u-joints, all 95+ have 5-297x u-joints, all others have 5-260x u-joints).
http://jeephorizons.com/tech/xjstockspecs.html
Dana 30 high pinion - reverse cut - 27 spline, 1.16" diameter shafts, 7.13" ring gear - used 84-99 (some axles through 91 are vacuum disconnect, 92+ are non-disconnect, 89-95 with ABS have 5-297x u-joints, all 95+ have 5-297x u-joints, all others have 5-260x u-joints).
http://jeephorizons.com/tech/xjstockspecs.html
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
aa7kn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-23-2015 09:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)