Anyone running this track bar?
 

I'm currently running an old skyjacker 3" kit (heavy spring rate coils) and stock track bar. Its time to upgrade. Check this out:

http://www.quadratec.com/products/16191_901_07.htm

I've heard good things about teraflex products, but don't think I've ever seen anyone on here using this. I like the way you can adjust it while its connected at both ends.

I know jks also makes a good one for 3" and under. What about the other options, rough country or rustys? Rough country says its for 4"-6", Rustys says they are good for 2.75" to 5". I'm afraid that with my used lift it may have sagged below the 3" mark and if I ever add a new bumper and or winch, the track bar will be too long.

Input is appreciated. Thanks

I got the one from Rough Country. On their website it says 4" and up but, I called and they said it will work for thier 3" lift. I got it and it does work and centered my axle back to center. It also has a moog joint on the end so, to replace it will be much easier then the teraflex one that is half the bar itself.

I DO NOT like the design of that teraflex at ALL...

for that price you should do a double sheer and maybe just play with the mount holes a little bit

What do you mean play with the mount holes?

I've never tried that brand. I'm running with a track bar from Ironman Fab....total beef!

basically space the mount holes out further so you can use a track bar that is for 4"+, there are several choices in that range