Anyone With IRO 6.5 lift!!
#1
Junior Member
Thread Starter
Join Date: May 2013
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Anyone With IRO 6.5 lift!!
Calling all guys running the Iron Rock Offroad 6.5 LA kit, I just installed my kit and about to install my SYE kit and Driveshaft.
Any of you guys running a pitman arm drop? if so how much drop and who did you go through?
Any of you guys running shims in rear? if so, which Degree? ( I know all Xjs will be different, just trying to compare. and who did you go through to get them?
thanks for any help!
Any of you guys running a pitman arm drop? if so how much drop and who did you go through?
Any of you guys running shims in rear? if so, which Degree? ( I know all Xjs will be different, just trying to compare. and who did you go through to get them?
thanks for any help!
#5
Seasoned Member
Join Date: Oct 2012
Location: 3 hrs NW of Moab
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: Big 4.0L
I am running iro long arms, rustys 8.5" coils, 4" drop pitman arm, the arm is too long I am getting some bumpsteer as the drag link and track bar are not parrell. make sure you buy a good track bar like the iro double shear or teraflex lcg bar. I bought the rough country as it flexes. I recommend the stock pitman first then try a zj if you need more drop. I also run a 5 degree shim. I highly recommend the shackle relocation I made my own but you can buy them. It made a world of difference.
Last edited by ExTrEmExJ99; 07-22-2013 at 05:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
JPXJMOAB
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-06-2015 07:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)