another lift question thread going from 4.5 to 6.5
#1
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Richmond.Va
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
another lift question thread going from 4.5 to 6.5
ok I have a full rustys 4.5 inch lift with full 4.5 inch leafs. I plan on getting the ironrock la upgrade. I want to upgrade to 6.5 inches as well what will I have to upgrade and what can I use off my old lift. as far as coils im just gonna buy some 6.5s I have an adj track bar but i think its only good to 5 inch lift can I get a drop bracket and keep it or do I need a new one. thanks
#2
CF Veteran
Join Date: Jan 2011
Location: Missouri
Posts: 2,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0HO
don't do a drop bracket... instead do a weld in over the axle track bar bracket...
it solves a lot of problems with track bar clearences
it solves a lot of problems with track bar clearences
#6
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Richmond.Va
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I know blocks are bad for stock leafs but being I have aftermarket ones can I use them. I was thinking 1.5 block and a 1 inch shackle to go with my 4.5 leaf
Trending Topics
#9
Senior Member
Join Date: Mar 2011
Location: Conowingo, MD
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
rustys makes a 1 3/4 or 1.5 shackel its nice i think they are way better than blocks i`m thinking blocks get some shift to them not a 100% that tho
#10
Seasoned Member
Join Date: Oct 2009
Location: New York
Posts: 329
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Do shackles in the rear. what about shocks, are yours going to be long enough with the long arms? Do you have longer break lines? Also if you do a drop bracket for the trac bar you need a drop pitman arm to match so your drag link and track bar are in a even line with each other. Oh and ofcourse you need an SYE.
I just bought the rough country 6.5 lift yesterday. I hope its better than what i got now. I think the ironrock long arm kit flexes like crazy. Just dont cut off the passanger side bracket if you ever plan to go back to two uppers.
-Mike
I just bought the rough country 6.5 lift yesterday. I hope its better than what i got now. I think the ironrock long arm kit flexes like crazy. Just dont cut off the passanger side bracket if you ever plan to go back to two uppers.
-Mike
#11
Seasoned Member
Join Date: Oct 2009
Location: New York
Posts: 329
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Oh and i have a 3.5" lift now and i tried to figure out well if i were to do 2" spacers and shackles what else would i need. And i pretty much needed everything else that i would be deeper than just buying a whole new kit. But you can deffenetly work with those leafs and that track bar you have. Also could buy a new kit and sell what you have.
Just some more input
-Mike
Just some more input
-Mike
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)