Another BB
#1
Junior Member
Thread Starter
Join Date: Feb 2011
Location: Belmont, NC
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
Another BB
Well I installed fresh new HD rear leafs which gave me around an inch i would guess over stock and then I added the RR bb lift kit but without the rear 1/2" blocks. My rear pinion was off by about 5 degrees, and I was getting driveline vibrations around 30-45 mph. I installed 4 degree shims this morning and most of the vibrations are gone completely except now when I brake after goig 40+ it feels like I can feel the rear driveline spinning... like a whum whum whum whum as I slow down. So TC drop or any other advice???
Thanks!
Thanks!
#2
Junior Member
Thread Starter
Join Date: Feb 2011
Location: Belmont, NC
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
Well just drove it home and did some more measuring, Looks like I'm at about 3 inches of lift in the back with the new springs, 1.5 inch shackles, and degree shims... I really do not like the idea of doing the transfer case drop, but I don't have the time right now to do the hack n tap and go to the JY and pull and front DS.
So I'm thinking 1" drop going in tomorrow, any suggestions otherwise???
So I'm thinking 1" drop going in tomorrow, any suggestions otherwise???