All-in-one steering box spacer, bumper tie ins
#1
Senior Member
Thread Starter
All-in-one steering box spacer, bumper tie ins
While I have the front stripped (axle, suspension, engine, brackets, wiring all out) and cleaning up to paint.
I figured it would be a good time the upgrade the steering box spacer and add frame/bumper tie ins,, and possibly an after market track bar bracket?
This is a mild DD build: 3.5" lift, 31-32" MAX tires.
I saw a few weld on inner rail steering box spacers, but none that go all the way to the bumper "flange", I would like one that welds on and has an ear to back up the stock bumper mount,, same with the outside.
And I really do not need 3/16 or 1/4 plate, one made out of 1/8" would be great.
Does any one make a combo steering box spacer/stiffener and bumper tie in?
While I am at it, would an aftermarket "drop" track bar bracket benefit a 3.5" lift?
Thanks,
Slack
I figured it would be a good time the upgrade the steering box spacer and add frame/bumper tie ins,, and possibly an after market track bar bracket?
This is a mild DD build: 3.5" lift, 31-32" MAX tires.
I saw a few weld on inner rail steering box spacers, but none that go all the way to the bumper "flange", I would like one that welds on and has an ear to back up the stock bumper mount,, same with the outside.
And I really do not need 3/16 or 1/4 plate, one made out of 1/8" would be great.
Does any one make a combo steering box spacer/stiffener and bumper tie in?
While I am at it, would an aftermarket "drop" track bar bracket benefit a 3.5" lift?
Thanks,
Slack
Thread
Thread Starter
Forum
Replies
Last Post
bryweb
Fabrication & builders section.
25
08-07-2015 03:33 PM
jeepguy93
For sale
25
01-30-2012 11:12 PM
rickybarth
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
11-21-2010 04:40 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)