89xjrocker

This will be the easiest to work with.


http://m.autozone.com/autozone-mobil...-25vy?id=59032

huntsman

Thanks, now would that just bolt on or do I use the rubber boot thingy thats on the old hanger ? Sorry for all these dumb questions never did this before so I wana do it right, gotta learn some how.

91XJMudMan

Anyone ever use an SLP muffler/resonator? I had thier "loudmouth'' exhuast on my old mustang and loved it. Just wondering if its worth it to buy a $75 "muffler" or just run it straight out of the cat

BumsModified98xj

Is there a after market S pipe available for the xj? I need to replace mine

DieselD

I'm pretty sure walker makes ones in different sizes. Part #s were in this thread somewhere I think. I'll look.

We are talking about the downpipe, after the header before the cat right?

huntsman

ok so what size adapter do I need muffler i believe is 2.5in outer diameter and the pipe after the cat is 2.25 I think, anyway just wondering what size adapter would be the right one.

For the muffler would it still be 2.5in but inner diameter ?

XJ_Hammer

If you want good Sound Try a Thrush Weld same as a flowmaster 40 but 60 bucks less

redrocket321go

I second that, I loved the way mine sounded, deep and throaty!

BumsModified98xj

Yes, a few weeks ago I took my rig in to the muffler shop to get her new exhaust system from the collector to the muffler 2-1/2" and it dumps @ the muffler (magnaflow) with a 3" turn down, he bent me up a S pipe and I kinda don't like it, its better than the stock one thow but it looks a little to pinched.so im just wondering if there's any good ones out there?

DieselD

If I remember correctly the Walker downpipe that's 2.5" isn't mandrel bent its got the ripples or whatever from being bent. I dunno what to call it.

DieselD

https://www.cherokeeforum.com/f58/dy...talled-152232/


Part # is in there. Along with other good links.

huntsman

so I got the exhaust, magnaflow muffler hooked up I like how it sounds but I got a problem the tail pipe near the end hangs kinda low. Its like that because of the bent in the pipe if I lifted it up to high the pipe would hit the frame of the car n rattle. It hangs even with the bottom of the heat shield kinda wanted it higher.

Anyone else have this issue with the performance curve exhaust ? Its either the pipe or I did a ****ty job putting it on lol but I tried my best I maybe could of twisted it a lil more to give me a slightly better clearance from the frame but I dont think that would work out cuz then the muffler hole wouldnt line up with the pipe.

austinjoe13

That's why you go to an exhaust shop and tell them you want it high and tight

huntsman

Im guessing its to late now since its mounted already, damn

Tom95YJ

That's what I did my whole system is nice and tucked up