Air pump power quick connects w/ jumper cable
#1
Member
Thread Starter
Air pump power quick connects w/ jumper cable
Thought I'd share how I wired up my portable air pump (for airing up tires).
It's a 16 foot, 8 gauge jumper cable that I cut 1 foot from one of the ends.
Then I crimped on 8 gauge power connectors.
This gives me the ability to run my air pump AND jumper cables, without carrying extra stuff. 2 for 1!
It's a 16 foot, 8 gauge jumper cable that I cut 1 foot from one of the ends.
Then I crimped on 8 gauge power connectors.
This gives me the ability to run my air pump AND jumper cables, without carrying extra stuff. 2 for 1!
#2
CF Veteran
Those are nice heavy connectors. I have been looking at some to wire in permanent jumper cables in the front since my batteries are in the back
#4
CF Veteran
That is good to know. I found a pair also for 0 gauge, which is what I will use for the jumpers. My electrical system has lots of juice and that is what I am using for cable
#5
Member
Thread Starter
I used 0 gauge for my battery and ground cables, but really? 0 gauge jumper cables? Dude, what are you trying to jump start, an aircraft carrier? lol
#6
CF Veteran
Well, not quite aircraft. But on occasion I need to start diesels. Not semis but large motorhome and smaller
Thread
Thread Starter
Forum
Replies
Last Post
Precept
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-19-2017 08:22 AM
MUKAK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
02-06-2014 02:24 PM
ol'DixieJeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-20-2011 03:49 PM
chuckd2008
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
05-09-2009 05:05 PM
kmanxj5050
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-08-2008 06:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)