ctjkelley

Is there any problems fitting lower adjustable control arms from a ZJ? I have found a set cheap and wanted to make sure that I could use them on my XJ. Thanks

94XjSport94

Nope. The LCA's will fit the same way. Just make sure they're the right length you need.

ctjkelley

What's the benefits of having adjustable arms on either top or bottom and not both.

94XjSport94

Set your caster angle and to alleviate driveline vibes (vibes more prone to 00-01 LP axles).

You need new LCA's around 3" of lift and the stock UCA's are good until about 5". The stock UCA's are very tiny and thin, if you find a good deal on good adjustable arms, I would replace all 4.

I'm at 4.5 and don't have any vibes and my caster seems to be ok.

Tom95YJ

On top will help you adjust the caster more so then the lower would but if you look how ****ty the lower arms from the factory lowers are. Huge improvement.

ctjkelley

Well I have a new set of RE fixed UCA and LCA I my just pick these up for a resale.

94XjSport94

Might be worth it if you get a good deal. Trade you a transmission.

I would run the adjustables and sell the fixed ones, assuming they're a good brand and the bushings/ joints are ok.

ctjkelley

Not sure of the brand but I think free is a pretty good deal.

94XjSport94

How are you getting them free?

ctjkelley

Friend of mine bought a XJ to play with he couldn't get it running so he bought a parts jeep and pulled the axles on it. There were the LCA he say just take them I don't need em

94XjSport94

I'll take them. Especially if you have uppers too lol

ctjkelley

It's just the lowers.....what's a set of adjustable run they are pretty price I think.

94XjSport94

$150 ish

ctjkelley

For just the lowers? And is that a used ish price?lol

94XjSport94

That's uppers. They are about the same price, maybe $130 for lowers.

That's new typically.