AAL appropriate for 3 inches?
#1
Member
Thread Starter
Join Date: Jun 2016
Location: east coast
Posts: 117
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0L 6cyl
AAL appropriate for 3 inches?
So im in the process of lifting my xj with a Rough Country 3'' lift kit with add-a-leafs. My rear springs are pretty flat but new leaf springs are rated at 3.5''+ of lift and while i would love to have the rear end of my jeep flying through the air for everyone to see, i don't want to have to go too expensive with this lift by adding an sye, better driveshafts, etc. So long story short, my question is will aals give me close to the three inches that i want on my truck or am i missing something.
#2
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
So im in the process of lifting my xj with a Rough Country 3'' lift kit with add-a-leafs. My rear springs are pretty flat but new leaf springs are rated at 3.5''+ of lift and while i would love to have the rear end of my jeep flying through the air for everyone to see, i don't want to have to go too expensive with this lift by adding an sye, better driveshafts, etc. So long story short, my question is will aals give me close to the three inches that i want on my truck or am i missing something.
#5
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Ummmm then I don't think you were really looking haha. The company you were looking at for aal has about 4 kits with 3 inch springs but I wouldn't recommend them. There is rustys, zone, ome, and almost every other company has a 3 inch lift besides rubicon express
#6
Member
Thread Starter
Join Date: Jun 2016
Location: east coast
Posts: 117
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0L 6cyl
I have a full lift kit, all I need are leaf springs. I found a set of zone leafs but they are a little more than what i was looking to spend. I may just go with 3.5 inch leafs.
#7
CF Veteran
Join Date: Jan 2012
Location: Ocean County, NJ
Posts: 2,208
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
replace your worn out leafs, you'll thank us later. Start preparing in the meantime. Soak your bolts down with PB blaster or equivalent, especially the leaf spring hanger/shackle bolts every night. You're welcome
Trending Topics
#8
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
How do you have a full kit without leaf springs? Don't cheap out on suspension stuff. You'll regret it later. Spend and be happy with your ride quality
#9
Member
Thread Starter
Join Date: Jun 2016
Location: east coast
Posts: 117
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0L 6cyl
I'm thinking thats the best way to go, and yes I have soaked the bolts with pb blaster every five minutes believe me but with my jeep being as old as it is, stuff is more than likely going to break. Oh and thank you.
#10
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Can you describe the "Full Lift" you now have for 3" and nothing for the rear??
Makes me wonder what you have for coils, shocks, track bar. You may need more than just a set of 3" rear leafs. Bur Rustys does sell the leafs alone I have had a set of 3" on for about 5 yrs now, using them for a 4 1/2" lift now.
Makes me wonder what you have for coils, shocks, track bar. You may need more than just a set of 3" rear leafs. Bur Rustys does sell the leafs alone I have had a set of 3" on for about 5 yrs now, using them for a 4 1/2" lift now.
#11
Member
Thread Starter
Join Date: Jun 2016
Location: east coast
Posts: 117
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0L 6cyl
Can you describe the "Full Lift" you now have for 3" and nothing for the rear??
Makes me wonder what you have for coils, shocks, track bar. You may need more than just a set of 3" rear leafs. Bur Rustys does sell the leafs alone I have had a set of 3" on for about 5 yrs now, using them for a 4 1/2" lift now.
Makes me wonder what you have for coils, shocks, track bar. You may need more than just a set of 3" rear leafs. Bur Rustys does sell the leafs alone I have had a set of 3" on for about 5 yrs now, using them for a 4 1/2" lift now.
Last edited by Cherokoolguy; 08-16-2016 at 04:50 PM.
#12
Junior Member
Join Date: Jul 2016
Location: Grove City Ohio
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I got the zone leafs 3in for $170 for both!! Brand new on eBay so check there, sometimes you can get good deals on new leaf springs