91 ax-15 swap into 88 renix
#2
Member
Join Date: Sep 2010
Location: duncan b.c
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L h/o
Yes I just did this to a 89 with a 92 ax-15 . Use the 92 mount and redrill the x-member, and move it back to the next set of holes . when its out replace the slave cylinder and new fluid should be good to go !!
#4
No it's aBA10/5
Mine has an external save an the 91 has an internal I think
I read some write ups bt they were confusing and said It would cost around 1500 to swap an ax-15 into my 88 is this true
Does anyone have a GOOD DETAILED write up I've look and looked none that I have found really made me understand what I need to do this
Mine has an external save an the 91 has an internal I think
I read some write ups bt they were confusing and said It would cost around 1500 to swap an ax-15 into my 88 is this true
Does anyone have a GOOD DETAILED write up I've look and looked none that I have found really made me understand what I need to do this
#5
#6
Member
Join Date: Sep 2010
Location: duncan b.c
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L h/o
Yah whole thing ax-15 with 231j and all u new is 90s mount with plate and a x member cost me under 100$ for the swap and 150 for the trans and case
#7
Member
Join Date: Sep 2010
Location: duncan b.c
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L h/o
Supper easy, move x member back to the next set of holes and everything else lines up, mine was internal slave but so was the 89 renix I got . Not 100% on the rear DS cuz I went the SYE route .
Thread
Thread Starter
Forum
Replies
Last Post
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-03-2015 05:46 PM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)