87 headlight wiring to 97+
#1
Senior Member
Thread Starter
Join Date: Dec 2011
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
87 headlight wiring to 97+
I converted my front end to 97+ and when I took my old grill and stuff off it people in my auto class tossed it. So does anyone have a diagram that shows what all the wires go to so o can splice the new harness into the old.
#3
CF Veteran
you do have to splice the front marker lights as they are 2 bulb compared to the 1 bulb.
other than that, it should be plug and play.
other than that, it should be plug and play.
#4
Senior Member
Thread Starter
Join Date: Dec 2011
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
By the air box I disconnected the original harness and lost it. I now have a 97 harness that has two more pins than the connector it goes to
#5
CF Veteran
oh yeah, you need both ends to the 97+ connector or you can just cut and splice each wire into your harness. use shrink tubes to seal it all up.
i'm gonna be doing this to mine maybe this week. had the parts for a couple of years, but decided to do it soon so i can install my new snorkel.
i will take pics and try to do a write-up on this.
i'm gonna be doing this to mine maybe this week. had the parts for a couple of years, but decided to do it soon so i can install my new snorkel.
i will take pics and try to do a write-up on this.
#6
Senior Member
Thread Starter
Join Date: Dec 2011
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
DAmn you! Ha wish I would of known I needed that! I think I'll just cuts both end off and figure out what goes to what then solder and heat shank it all.
Thanks though
Thanks though
Thread
Thread Starter
Forum
Replies
Last Post
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-08-2015 06:28 AM
wayaha
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-05-2015 05:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)