8.8 swap shock and Ebrake question
#1
Senior Member
Thread Starter
8.8 swap shock and Ebrake question
Swapping in an explorer 8,8 (disc)
I always hated the XJ rear shocks hanging so low. I had heard of moving the mounting point up even with the axle (new bracket?), and with a 3" lift this allowed you to use the stock shocks.
So with my 8.8 swap, I am ready to order a bracket kit,, do any of the kits have shock brackets that are higher than the stock XJ brackets?
Between my OME 3" springs, approximently 1/2" from shackle relocation, and the thicker 8.8 axle, I have no idea how much lift I will have? probably closer to 4"
Also, are the E-brake cables from the explorer useable??
Slack
I always hated the XJ rear shocks hanging so low. I had heard of moving the mounting point up even with the axle (new bracket?), and with a 3" lift this allowed you to use the stock shocks.
So with my 8.8 swap, I am ready to order a bracket kit,, do any of the kits have shock brackets that are higher than the stock XJ brackets?
Between my OME 3" springs, approximently 1/2" from shackle relocation, and the thicker 8.8 axle, I have no idea how much lift I will have? probably closer to 4"
Also, are the E-brake cables from the explorer useable??
Slack
Thread
Thread Starter
Forum
Replies
Last Post
96XJ2Door
Modified XJ Cherokee Tech
31
09-30-2013 05:00 PM
rshackleford
Modified XJ Cherokee Tech
3
03-11-2012 11:51 AM
lukc22
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
05-26-2010 10:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)