4.10-11's with 35's?
03-07-2011, 04:06 PM
#1
Member
Thread Starter
Join Date: Nov 2009
Location: Provo UT
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89 2 door
Model: Cherokee
Engine: 4.0
4.10-11's with 35's?
is anyone running this setup with a ba 10/5 or a ax 15? any complaints. im considering this option as opposed to 4.56s only because i already have 4.10-4.11's already.
03-07-2011, 11:02 PM
#4
Senior Member
Join Date: Dec 2009
Location: Elk River, Minnesota
Posts: 682
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
4.10's will be way better than stock gearing which I assume is 3.2 whatever's that comes with the 5spd. 4.56's would be even better. I would use the ones you have its free and can always upgrade later.
03-07-2011, 11:20 PM
#5
Member
Thread Starter
Join Date: Nov 2009
Location: Provo UT
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89 2 door
Model: Cherokee
Engine: 4.0
thanks
thats what i thought. just double checkin to see if anyone ran the setup. im getting an hp30 with yukon shafts 4.10s and a lockrite. should be fun to go with my 44 
03-08-2011, 01:02 PM
#7
Junior Member
Join Date: Jan 2010
Location: Tucson, AZ
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
Im running 34.5's with 4.10 and its okay. The speedo is still off and its kinda slow. I did the gears when i had 31's so i have to regear again at some point. No problems on street or offroad and much better than stock
