4.0 to 4.0 HO swap
Can someone please help. I have a 1990 Cherokee with the Renix motor and I want to put a 1993 HO in it. I am going to change the wiring harness and ECU/PCM along with fuel lines and fuel sending unit that are from an HO. I need to know if there is anything else I need to swap over? I do not need info on swapping an HO in with the Renix manifold and wiring harness. I am doing the whole HO and wiring harness swap so do not even mention any Renix parts.
I have been searching through threads to find all the info I have now but am just covering all my bases. I want to hear from people have DONE THE FULL SWAP ONLY PLEASE! That is the wiring harness and engine from a HO Cherokee and everything they swapped over like gauges etc. If youre going to be a smart*** please proceed to another thread thanks guys |
Ask cruiser54
|
Originally Posted by XJwonders
(Post 3148747)
Ask cruiser54
|
Originally Posted by cruiser54
(Post 3148827)
Nah. I don't swap the whole harness to HO from Renix. I do it the easy way.
|
Easy way best way. 93 HO ZJ to 4.6 Stroker. Injector adapters to 2000 intake that's it.
|
Originally Posted by jeepin89701
(Post 3271768)
Easy way best way. 93 HO ZJ to 4.7 Stroker. Injector adapters to 2000 intake that's it.
|
Is there a problem with the engine you have now or you just want more power?
|
325 hp from a I6, Worked out very well for me!!
|
Does that mean you went and cut the lock lol
|
i have a 95 motor in my 90, but not the HO harness.
i don't think you can successfully switch it to HO very easily if not at all. |
Originally Posted by caged
(Post 3330767)
i have a 95 motor in my 90, but not the HO harness.
i don't think you can successfully switch it to HO very easily if not at all. Do what you did, and I've done many times. |
christ, I scrolled down too far by accident and necro posted.
FML |
99 XJ
I figured it was safer and "cleaner" for the forum to revive this thread then to start a new one on the same topic.
I've been eyeballing the net for a detailed full vacuum diagram for my 99 XJ with the 4.0. I want to get a roll of replacement tubing and just do the whole darn thing... 20 years old and if I've got a leak somewhere, well... all the rest of those plastic/rubber lines are the same age. Anyone know where to track this down?....that is detailed enough to go off of? |
Originally Posted by cruiser54
(Post 3148827)
Nah. I don't swap the whole harness to HO from Renix. I do it the easy way.
|
Originally Posted by FACKQBIC
(Post 3588793)
Cruiser54 , I have to ask about the max size tire and rims I can put on my 96 XJ 4x4 without cutting or rubbing? I'm trying to keep my jeep stock height but more aggressive looking.
|
All times are GMT -5. The time now is 12:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands