265/75/16's with 3" Lift???
#1
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Fort Dix, NJ
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
265/75/16's with 3" Lift???
I was wondering if any of the experts out here see any issues with running a 265/75/16 with a 3" rough country lift? Will they rub when flexing or any other issues?
Thanks for the help.
Wayne
Thanks for the help.
Wayne
#2
CF Veteran
Join Date: Mar 2010
Location: wilkes barre PA.
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Year: 96
Model: Cherokee
Engine: 6 cylinder
265's are about the same as 31's are they not? If I am correct they will fit fine I have 31's on my 3" and I have no rubbing at all except when fully flexed. If you do rub when flexed just just start trimming a little bit at a time until you don't rub the fenders any more.
#4
Seasoned Member
Thread Starter
Join Date: May 2010
Location: Fort Dix, NJ
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
The trouble I'm having is I wanted to get a good aggressive AT in a C load range and I can only seem to find them in a 265/75/16 which is 31.6"
http://mastercrafttires.com/html/pro...&artw=75&rd=16
or this one
http://www.coopertire.com/html/produ...&artw=75&rd=16
If trimming is needed, where is the most likely place it will need to be done and possibly how much with a 3" rough country lift which will be going on Monday?
Thanks again for the help.
Wayne
http://mastercrafttires.com/html/pro...&artw=75&rd=16
or this one
http://www.coopertire.com/html/produ...&artw=75&rd=16
If trimming is needed, where is the most likely place it will need to be done and possibly how much with a 3" rough country lift which will be going on Monday?
Thanks again for the help.
Wayne
#5
CF Veteran
Join Date: Jun 2009
Location: Denver, CO
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Tons of threads on fender trimming. Just do a search.
I trimmed and ran 34s on 4.5 w/stock bumpstops. Mega flex and no rubbing, and kept my stock flares.
I trimmed and ran 34s on 4.5 w/stock bumpstops. Mega flex and no rubbing, and kept my stock flares.
#6
Newbie
Join Date: Feb 2011
Location: Pennsylvania
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I just lifted my 2001 in july 3" in rear 4.25 in front with LT265/70/16 I only rub a little on the driverside.The front more to make it level.
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)